HOME | DD
Yuki-Myst — Steelix papercraft
Published: 2010-10-23 21:48:00 +0000 UTC; Views: 5690; Favourites: 71; Downloads: 178
Redirect to original
Description
Steelix: "If i eat this, I won't have to be inside anymore"I've built the Steelix papercraft from Paperpokes using some stones inside the base. I love the pose, but was very tough to built.
After that, I painted it with metallic grey and many coats of varnish. last, I built the rock/sand terrain base.
Steelix and pokeball is property of Nintendo.
Related content
Comments: 45
ola me gusto mucho tu trabajo me podrias decir por favor donde descargarlo
👍: 0 ⏩: 0
This is really cool!
I love the angle and focus you chose when you
captured this image!
👍: 0 ⏩: 1
Wow, this is great! I love how you painted it.
👍: 0 ⏩: 1
I favorited then commented hahahahaha
Nice perspective
👍: 0 ⏩: 1
Wonderful!. I can imagine how difficult it must have been 
👍: 0 ⏩: 1
Thank you! 
👍: 0 ⏩: 0
lookd really cool! I like the pose to but wasn't the pose hard to figure out??
👍: 0 ⏩: 1
Steelix can float, so I think every pose that an "snake body" can do is possible for Steelix, having the advantage of floating
👍: 0 ⏩: 0
I didn't know varnish could be applied to paper! Cool results!
👍: 0 ⏩: 1
I didn't know either, until I tried
👍: 0 ⏩: 0
buenisimo! Hey, tu que les pones a tus modelos? algo para protegerlos para q brillen o es la impresion? 
👍: 0 ⏩: 1
Gracias ^^ . Si, les pongo varias capas de barniz para protegerlos y darles brillo, así duran mas
👍: 0 ⏩: 1
oh buenisimo! habia pensado en eso pero pense q podria correrse la tinta o algo, probre con uno y vere q tal me sale xD
👍: 0 ⏩: 1
Primero yo le doy un spray protector de documento,s que evita que la tinta se corra, y despues ya le doy spray de barniz normal. Haz pruebas en cosas impresas a ver como te queda
👍: 0 ⏩: 1
Looks cool ad has a great shiny almost metallike glow
👍: 0 ⏩: 1
Thank you
👍: 0 ⏩: 0
lol ok one, were'd u get the tiny pokeball? i wants one >_< and two i wants a paper steelix XD
👍: 0 ⏩: 1
I purchased a tiny working gashapon Pokemon machine, found it on a Japanese website I don't remember now, sorry 
👍: 0 ⏩: 1
Ehat kind of varnish have u used???? i'd like ti put some on my models!! It looks awesome!!! amazing model
👍: 0 ⏩: 1
Thanks. I use an spray. This kind of varnish is special for protectig documents and paper. First I put one coat of this, and after that I can use many coats of normal varnish in spray (just the cheap ones you can buy in stores, but use it in spray, and many thin coats, let the paper dry it)
Also I used a very thick paper, 250gr/m2. Is the best and can be printed in a domestic printer
👍: 0 ⏩: 1
this technique is also usable to lighter paper??? most of my models are in 120gr/m² or 160gr/m² just my torterra is 200gr/m². How much dos the spray costs??????
👍: 0 ⏩: 1
There are many diferent prices around that. The spray I use for paper protection is around 11€, very expensive if i compare with the varnish spray i use after that (2€)
The spray for paper can be used for all kinds of paper. The other varnish will hardener a little the figure, but I still test it into 120gr printed paper. Don't worry about ink, because if first you spray the paper protection, ink will not be warped
👍: 0 ⏩: 0
Thanks
👍: 0 ⏩: 1
