HOME | DD

vash68 — 1913 Ford Model T Van

Published: 2011-05-17 18:30:38 +0000 UTC; Views: 1191; Favourites: 16; Downloads: 24
Redirect to original
Description One of the models Ive been searching all over for, an Entex 1/16th scale Ford model T. These things are packed with detail just out of the box, they even come with metal, and wood parts, along with wires for the engine.

H'ere's a few other pics of it: [link]

[link]

I wanted to go eith the Coca Cola Decals it came with, but after some research I found out they were period correct. I wanted decals on it that everybody could reconize so I went with the Texaco decals, but they didnt have one of the actual logo. I was luck enough to find a pic of a 1913 Texaco logo and make that into a decal which I put 2 on each side, and 2 smaller ones on both rear doors.

I also added some more wood pannels to the interior, in addtion to the wood parts that came in the kit, like inside the cowl :[link] under the seat, and on the rear doors. Other than that I pretty much left everything alone, and thought everything was detailed enough.
This is going into a model contest this weekend, and I bought a nice mirrored base to place under it to show off all the chassis detail :[link]
Related content

vash68 - 1909 Ford model T

vash68 - 1930s gas pump

vash68 - Munsters Koach and Dragula

vash68 - 1925 Ford Model TT

vash68 - 1962 VW Samba Bus

vash68 - 1937 Ford Coke Truck

vash68 - Dragula model

vash68 - 41 chevy stake bed

vash68 - 1927 Ford Model T model

hankypanky68 - '40's Woodie Silver

SwiftysGarage - Mike's Sunoco

SurfTiki - '26 Ford T Sedan Delivery

DARKZADAR-ZERO - The Rolls Royce Grey Ghost 1

rlkitterman - North Kingston NH Ford Police Van

LeDorean - 1924 Ford Model T Pickup

happymouse666 - Rusty Ford

sirjosh9 - Ford Model T Body and Gas Tank

davincipoppalag - 2017 Boothe Park Car Show LIII
Comments: 36

Deorse [2011-06-08 16:28:17 +0000 UTC]

She turned out pretty nice.

👍: 0 ⏩: 1

vash68 In reply to Deorse [2011-06-08 18:59:33 +0000 UTC]

Thanks

👍: 0 ⏩: 1

Deorse In reply to vash68 [2011-07-13 05:43:41 +0000 UTC]

You're welcome.

👍: 0 ⏩: 0

BlueFox284 [2011-05-18 22:29:46 +0000 UTC]

This is nice. . .This is one of those builds that when you get down, you pour yourself a nice drink, and gaze at its beauty for a while. . .

As for the contest- Its in the bag!!!

👍: 0 ⏩: 1

vash68 In reply to BlueFox284 [2011-05-18 22:34:40 +0000 UTC]

Thanks! It was well worth the $80 I plaid for it! lol Indeed, I have it at the front of the living room infront of where I normally sit on the couch I really need a case for it, Im so friggin paranoid of dust getting on it..:/

👍: 0 ⏩: 1

BlueFox284 In reply to vash68 [2011-05-18 22:49:51 +0000 UTC]

Yeah. . .A 1/18 case at that. . .

👍: 0 ⏩: 1

vash68 In reply to BlueFox284 [2011-05-18 23:12:04 +0000 UTC]

I think one of the large aircraft cases Hobby Lobby sells would hold it, Ive bought a few of those just so i can fit 3 or 4 24th scale cars in them.

👍: 0 ⏩: 0

raipo [2011-05-18 11:23:40 +0000 UTC]

Man, sweet and clean as always.

👍: 0 ⏩: 1

vash68 In reply to raipo [2011-05-18 21:41:22 +0000 UTC]

Thanks dude! Yeh painting anything white or a light color is always a nightmare for me! lol

👍: 0 ⏩: 1

raipo In reply to vash68 [2011-05-19 11:41:32 +0000 UTC]

You said it. White (and red) are problem colors for me too. And gundams take up a lot of white argh.

👍: 0 ⏩: 1

vash68 In reply to raipo [2011-05-19 21:45:17 +0000 UTC]

Yeh I have trouble with reds too, alot of the engines I paint are red and it takes several coats to cover everything nicely, especially if the engine is molded in black! lol

👍: 0 ⏩: 1

raipo In reply to vash68 [2011-05-20 11:11:42 +0000 UTC]

uhuh. If the undercoat is too black, the red tends to go brown. When the Undercoat is grey, it usually turns orangey. Worse is when the undercoat is white, red tends to go pink. Argh. I had nightmares about this.

👍: 0 ⏩: 1

vash68 In reply to raipo [2011-05-20 16:55:24 +0000 UTC]

Whats worse is when its something too small to airbrush lol

👍: 0 ⏩: 0

HotRod-302 [2011-05-18 03:45:00 +0000 UTC]

Looking awesome! You can tell you really enjoyed this one!

👍: 0 ⏩: 1

vash68 In reply to HotRod-302 [2011-05-18 21:40:03 +0000 UTC]

Indeed I did! I love these bigger models, it way too easy to add more detail, but of cousre the only downside is the size and how much space they take up...

👍: 0 ⏩: 1

HotRod-302 In reply to vash68 [2011-05-19 06:13:04 +0000 UTC]

That jjust means when you get a garage of your own you'll have to display them in your shop!

👍: 0 ⏩: 1

vash68 In reply to HotRod-302 [2011-05-19 16:09:08 +0000 UTC]

I plan too! I just need to find a cheap, glass display counter, like what you'd find in a jewelry store or something

👍: 0 ⏩: 0

rustyironmonger [2011-05-18 03:22:48 +0000 UTC]

Very good... I wish you luck with the contest!

👍: 0 ⏩: 1

vash68 In reply to rustyironmonger [2011-05-18 21:38:02 +0000 UTC]

Thanks! Still hoping when I go I'll find that Entex stakebed again, this is the exact show I went to where I saw it. When I see it I'll buy it and nothing else, since that'll be most of the money I'll have there....
I didnt realize how much of a deal that sakebed was till i looked on ebay lol

👍: 0 ⏩: 1

rustyironmonger In reply to vash68 [2011-05-21 07:23:36 +0000 UTC]

Sounds good... hope you find it!

👍: 0 ⏩: 1

vash68 In reply to rustyironmonger [2011-05-21 23:38:38 +0000 UTC]

Didnt find a stakebed like I wanted...I'll post a journal about the contest soon. But I did find an Acadamy 1928 Lincoln for $20! Ive seen them go for twice that, even more sometimes, so I had to have it! lol Also bought smething ive never built before...a Civil War confederate sub resin kit! lol When were in Tennesee, we see all kinds of civil war things in antique stores, and visit quite a few Civil war battlefields..I thought it was time Id build something Civil war related, it was a cheap too

👍: 0 ⏩: 1

rustyironmonger In reply to vash68 [2011-05-21 23:57:41 +0000 UTC]

Sounds almost as good as the stakebed... I got a diecast 1941 Plymouth pickup at a swap meet today, and got pics of some parts, old signs and cars there. There was a brass-era Cartercar phaeton, Hupmobile sedan and Model TT Ford pickup that you'd have liked, got pics of all three.

👍: 0 ⏩: 1

vash68 In reply to rustyironmonger [2011-05-22 00:11:57 +0000 UTC]

Yeh I think its just a repackaged entext kit since I know entex made a 28 Lincoln just like it with opeing doors too.

Cant wait to see the pics, and the dicast!

👍: 0 ⏩: 1

rustyironmonger In reply to vash68 [2011-05-22 00:17:19 +0000 UTC]

Pics of the diecast are coming up soon (maybe tonight), and a photo of the Model TT is already up.

And did you notice that I got a gift subscription from another deviantARTist?

👍: 0 ⏩: 1

vash68 In reply to rustyironmonger [2011-05-22 00:38:03 +0000 UTC]

No I didnt see that, cool I'll post pics of my bargins here in a bit

👍: 0 ⏩: 1

rustyironmonger In reply to vash68 [2011-05-22 00:46:28 +0000 UTC]

Absolutely... they will all be cool when they are built.

👍: 0 ⏩: 1

vash68 In reply to rustyironmonger [2011-05-22 01:02:25 +0000 UTC]

Thanks

👍: 0 ⏩: 1

rustyironmonger In reply to vash68 [2011-05-22 01:17:44 +0000 UTC]

You're welcome... they are cool now too!

👍: 0 ⏩: 0

prorider [2011-05-18 01:47:37 +0000 UTC]

sweet model
i have one with coca cola decals but a plastic small shit
I want to do one with wood or metal

👍: 0 ⏩: 1

vash68 In reply to prorider [2011-05-18 21:35:44 +0000 UTC]

Thanks!
Is the one you have from matchox? Becuase Matchbox made a Model T van this same year with coca-cola decals on it durring the 70s

👍: 0 ⏩: 1

prorider In reply to vash68 [2011-05-19 02:56:57 +0000 UTC]

nop, is a plastic car without brand
they was free buying some bottles
[link]

👍: 0 ⏩: 1

vash68 In reply to prorider [2011-05-19 21:46:42 +0000 UTC]

Cool, they almost look like the matchbox ones, but matchbox is way more detailed.

👍: 0 ⏩: 1

prorider In reply to vash68 [2011-05-20 16:49:07 +0000 UTC]

matchbox is smaller
Its like a cheap lledo

👍: 0 ⏩: 1

rustyironmonger In reply to prorider [2011-09-22 17:41:47 +0000 UTC]

Golden Wheel. Not great quality, and like a cheap Lledo, as you said.

I have a couple of their 1/24 1940 Ford trucks in storage, they have miserable quality & detail, one has the seat rattling around inside and has been that way since I bought it 10 years ago...

👍: 0 ⏩: 0

gberzzerk [2011-05-17 21:08:37 +0000 UTC]

Very nice work. Very clean build too. Do any of the doors open ? From what we see in the pics , The kit does look to have lots of detail items.

👍: 0 ⏩: 1

vash68 In reply to gberzzerk [2011-05-18 01:10:23 +0000 UTC]

Thanks! Yeh the rear doors and the right side door opens.

👍: 0 ⏩: 0